RSIC-1 Resilient Channel Isolation Clips offer high STC and IIC. Using resilient channel alone will achieve STC 55. When used with Mass Loaded Vinyl, STC increases to 67.

Stud Isolators decouple drywall from the stud, increasing isolation performance. Economical and easy to install, stud isolators can be used alone, or with mass loaded vinyl or resilient channel for enhanced STC.

Isolation pads are used underneath heavier objects that need to be isolated from their environment. Furnaces, HVAC units, and hot tubs are among the uses for this product.

SB-ISOTAPE Rubber Isolation Tape

SB-ISOTAPE is a cost effective product designed to decouple the sheetrock panels from wood or steel studs.

The installation of a mechanical door seal will block sound that normally enters or exits a space through the gap below the door. Mechanical door seals may be surface mounted or mortised into the bottom of the door itself.

A door jamb seal is designed to block sound that normally enters or exits a space through the gap on the sides and top of the door. The door jamb seals are attached to the door jamb and may be covered for cosmetic integration.

There is always an air gap at the inside seams of doors. Installing door gaskets from Cascade Audio fills the gap with sound control material.

Recycled Cotton HVAC Duct Liner
SB-DL-0.5/1/2

Duct liner is a thermally bonded HVAC insulation that offers superior acoustic and thermal performance. SB-DL is made of recycled cotton fibers and does not itch or cause skin irritation. The cotton fibers used to manufacture SB-DL offer excellent sound absorption properties.

Recycled Cotton HVAC Duct Wrap
SS-DW-415

SS-DW is a Class A, recycled cotton duct wrap material designed to reduce noise that may enter or exit a duct through the side walls as well as reflect thermal energy.