Marine applications include but are not limited to: engine box insulation, and berthing quarter insulation. Basically anywhere you would want to insulate from heat or cold CAE's products can be used.

TG-1

ThermaGuard is a thermal insulating coating made up of air filled glass beads held in suspension by a high temp latex acrylic binder. This advanced material yields superior insulating capabilities. ThermaGuard is a premixed composite consisting of 80% microscopic air filled glass beads.

VB-TS is an adhesive backed, low profile combination thermal barrier and acoustic absorber. It reflects thermal energy and absorbs mid-band and high frequency noise.

VB-TSM is the perfect product for severe noise control problems. It is especially effective for RV and marine engine compartments and generator housings. VB-TSM is a unique, high performance composite material incorporating two layers of acoustical foam, a loaded vinyl barrier and an aluminized mylar thermally reflective skin.

SG-1

The SG-1 spray application tool is a 1 quart, internal mix, siphon feed spray gun designed to deliver high solids vibration damping and thermal control coatings. The SG-1 features an aluminum 1quart cup and 0.5” interior diameter draw tube to ensure maximum material flow.