PAA3
Downloads:

PAA3

Phonic PAA3 Specifications

Input/Output
• Microphone: Built-in miniature omni direction condenser microphone
• Line: XLR jacks for line input and output
• Data Port:USB 1.1 interface

Measurement Range
• SPL (Microphone input): 30 to 130 dB SPL
• dBu (Line input): -50 to +40 dBu
• dBV (Line Input): -52 to +38 dBV
• Voltage (Line Input): 5 mV to 80 V

Settings
• Weighting: A, C or Flat
• Peak hold: ON/OFF
• Maximum Level Display: RESET
• Response Time: 35 ms, 125 ms, 250 ms, 1 sec

Other Functions
• RT60: Reverberation time display, up to 30 seconds
• Memory: 10 RTA+ 6 average calculation
• Average Calculation: For 10 RTA memories
• EQ Setting Value Display: 31-band
• Phase Checker: Through polarity signal
• Transmission: Simultaneous operation with PC or laptop through USB port

Noise Generator (Based on 6VDC power source)
• Pink noise: Balanced output, -10 dBu
• 1K Hz Signal: Balanced output, -10 dBu
• Polarity Signal: Balanced output, -10 dBu

Dimensions (H x W x D)
• 5.7 x 3.26 x 1.55 inches (5.7144.95 x 82.95 x 39.42 mm)
• Weight (with batteries) 0.78 lbs. (354 g)

Phonic PAA3 Features:

• Palm-sized, lightweight audio analyzer for all sound engineers
• 31-band spectrum analyzer, RT60, SPL meter, and more
• Easy operation with built-in microphone and generator
• EQ setting calculation offers advice for boosting and cutting at the touch of a button
• USB interface allows real-time computer operation
• Seven hours of continuous operation with four AA batteries
• 31-band Real Time Spectrum Analyzer allows Db analysis of offending frequencies
• 31-band EQ setting value display (Boost/Cut)
• RT60 measurement
• Built-in calibrated measurement microphone
• Phase checker
• Noise generator with pink noise, 1kHz and polarity test signal, balanced output
• Memory and average calculation function
• SPL meter calibration through sound level calibrator
• Sound Pressure Level Meter from 30 dB~130 dB
• Line signal measurement display in dBu, dBV, or Volts (AC)
• SPL meter and level meter have three level range selections
• Maximum level, Peak hold displays
• XLR input and output sockets
• USB interface for desktop software control
• Audio test signal CD and supporting software
• Three power modes: (1) Power Save (2) On (3) Off
• Operates seven hours with four AA batteries
• AC power adapter included

PART: PAA3
Dimensions: 5.7 x 3.26 x 1.55 inches

 

 

 Cascade Audio Engineering  Bend, Oregon USA Phone: 541.389.6821 • Fax: 541.389.5273 • E-mail: sales@cascadeaudio.com
 © 2013 Cascade Audio Engineering, Inc., All rights reserved.

 

 

 

 

 

Automotive Noise Control Automotive Audio Enhancement APS Power Supplies Commercial / Residential Marine